Change to bigger oil filter based on manufacturer's specs? - oil filter manufacturers
I have a 1988 Toyota Motor 4afe. It uses an oil filter from a small scale. For cars of model year engines with 4afe, 1987, Toyota recommends a filter, which was larger than that recommended for the year 1988. Same engine, same car model, but for some reason, the recommendation for the size of oil filter to a smaller one. Can I filter the largest - which is produced by the same manufacturer? It is the same filter material, but more of the same, but probably has a low oil pressure due to its large filter volume and of course I would like to add a little oil, but never the main engine with oil - I do not want to disrupt a meeting. Normally, to fill down to 95% of capacity - the tolerances of my car in the area.
Oil Filter Manufacturers Change To Bigger Oil Filter Based On Manufacturer's Specs?
7:41 PM
5 comments:
A better solution would be to go a bypass oil filter on. A by-pass oil filter from the filter to less than 5 microns and acts as an additional filter to clean the oil. They have no extra oil to add additional filters.
Turn the engine is a little low, as oil in the same condtion next dehydrated. You NEVER run your car even a little oil, although within the specification MFG. The oil is here not only acts as a lubricant, but also as a coolant and a repository for dirt.
On the other hand, never fill your engine. They may also have other problems such as foaming could result from oil, whipped by the crankshaft.
Bypass Oil contributors, prolong engine life, almost twice as high as normally used in heavy trucks. In addition to a car engine is just extra insurance. See the link below and see the rest of the Amsoil website for more information.
Run the larger filter, if they do not interfere with anything and is around the same as the smallest since an oil or a valve. The larger filter will do a better job of filtering and help cool the oil is better and has no effect on the pressure --- which is determined by the pump. With both an old trick them on the small block Chevrolet racing engines with a filter instead of PF35 filter PF25 normal use. We also use large magnets to the underside of the filter through all the small metal particles start in the oil and even more rapid wear of the engine. You need to keep the oil is to maximum and to determine the quantity of additional oil for large ...... Compensation does not run as low at 1 / 2 liter, especially in smaller engines hotter than the V6 or 8 incline.
went to a small filter, because the space required
I had an 88 Corolla and the use of a larger filter on for years without problems. The extra length is not affected. Thus, the filter was in the memory of the same thread and diameter O-ring is, but longer. Had 175K miles on it when it amended in 2005 for a Corolla. Sorry, I have no manual and / or enter the room.
I always felt the addition of filters can only help. do.
I had an 88 Corolla and the use of a larger filter on for years without problems. The extra length is not affected. Thus, the filter was in the memory of the same thread and diameter O-ring is, but longer. Had 175K miles on it when it amended in 2005 for a Corolla. Sorry, I have no manual and / or enter the room.
I always felt the addition of filters can only help. do.
Post a Comment